2.4m Woodgrain Effect Reversible Composite Decking Board – Colour:Charcoal

DescriptionThese beautiful woodgrain decking boards are the perfect addition to any garden. Made from a combination of 60% recycled hardwood fibres and 40% recycled polyethylene, the woodgrain effect on the surface of the boards gives the natural element of a classic timber board, with all the additional benefits of a composite board.Why Use These 2.4m Woodgrain Decking Boards?Premium honeycomb structure for added strength and lightweight boardsNarrow grooved spaces in the boards make them low-slip and less susceptible to watermarks and stainingCan be cut to size and also sanded if needed (use a fine-toothed saw)Available as FSC certified for the same costMade from a combination of 60% recycled hardwood fibres and 40% high-grade recycled plastic – an eco-conscious choiceRange of unique coloursBeautiful woodgrain finishFree samples available on requestLow maintenance boardsEach 2.4m hollow composite deck board is reversible, with one side utilising a flat surface, and the other with narrow grooved spaces that makes them low-slip and less susceptible to watermarks and staining.It is advised to buy all boards that are needed for your project at the same time to ensure the same colour throughout your installation.Different board batches may have slight colour variations, thanks to the natural wood material within the boards. We strongly recommend ordering everything at once so make sure to double-check quantities!Full Specifications of These 2.4m Boards:Board Length: 2.4mBoard Width: 150mmBoard Thickness: 25mmEach board weighs approximately 6.72kgFrequently Asked QuestionsHow long will it take to deliver the 2.4m decking boards?7-10 working days from receipt of order. Sometimes sooner, we just don’t like to promise!What drill and screws do I need to install composite decking?Standard power drills can be used when installing composite decking boards. A standard Phillips screwdriver (PH2 x 50mm) should be used when working with speeddekz 65mm woodscrews and speeddekz 50mm screws.Can I cut these 2.4m composite boards and if so, how?Composite decking boards can be cut using any standard wood-cutting tools. We recommend using a fine-toothed blade to get the cleanest finish to your cut edge.What base should I use under the composite decking?Generally, there are 2 main options. Firstly, you can use a concrete base. When doing this, a 100mm thick concrete base is recommended, with a slight slope for drainage to occur. The optimum slope should be around 5mm for every metre.Secondly, you can use a grass or soil base. Here, you should remove the turf/soil until the ground is completely even and remove any debris/rocks from the area. Cover the area of your site with a layer of